TECHNICAL DATA & PRODUCT DESCRIPTION

Produced by

Accelerated Concrete Technologies
110 ATP Drive
Albertville, AL 35951
Tel. (800) 999-1287  (256) 891-0997
Fax (256) 891-2703

SECTION 1:  Product Identification

ACON Self-Leveling Topping (SLT)

Formula: Proprietary acrylate dispersion

SECTION 2: Hazardous Ingredients

Hazardous compents(s): acrylate with an insignificant trace of VOC. > 1/2% by/wt.

SECTION 3: Physical Properties

Physical Description: Milky-White, Liquid
Range: 7-8
Specific Gravity: 1.04

SECTION 4: FIRST AID AND MEASURES

INHALATION: SLT application indoors or outdoors requires no special ventilation.  SLT’s almost odorless fumes are not hazardous to breath, however, a mouth and nose dust mask should be worn while applying anything onto set concrete surfaces, due to potential disturbance of sharp alkaline cement dust, or other particles which may become airborne.

EYES: Flush liberally with fresh lifting upper and lower eyelids occasionally.  Seek Medical attention if irritation develops.

INTERNAL: Drink plenty of water followed by induced vomiting, seek medical attention.

SECTION 5: HEALTH HAZARD INFORMATION

Primary route of exposure: Eye and skink contact, inhalation and ingestion.

SECTION 6:  TOXICITY DATA

Toxicity: SLT is not toxic with normal incidental contact and/or prolonged exposure.

SECTION 7: PERSONAL PROTECTION

Protective Clothing: None required
Other protective measures: Protective eyewear is suggested, with eyewash facility nearby.

SECTION 8: FIRE & EXPLOSIVE INFORMATION

Flamability: None
Extinguishing media: IN case of surrounding fire involvement, water fog or dry is foam is recommended.

SECTION 9: HAZARDOUS REACTIVITY

Stability: Stable
Hazardous decomposition products: CO, CO_2, NO_X

SECTION 10: HAZARDOUS REACTIVITY

Spills or leaks: Dilute and flush with water where drain disposal is available.  If accidentally discharged onto soil, do not flush, or allow SLT to drain into creek, lake or etc.

SECTION 11: SPECIAL PRECAUTIONS

Storage: Store inside or outside properly situated away from incompatible materials, i.e. strong acids.
Temperature range 50 F to 85 F.

SECTION 12: ECOLOGICAL INFORMATION

SLT is environmentally friendly, and does not pose threat to the environment.

SECTION 13: DISCALMER

This MSDS should not be construed as  product sales literature.  ACON expressly disclaims all implied warranties or merchantability and fitness for particular purpose, with respect to the information provided herein.

SECTION 14: NOTICE

All information appearing herein is based upon data generated by ACON from recognized technical sources, and is believed to be accurate.  SLT’s conditions of use are beyond ACON’s control, and therefor, users are responsible to verify this data under their own operating conditions to determine whether SLT is suitable for their particular purposes and they assume all risks of their use, handling, and disposal of SLT, or from the publication or use of, or reliance upon, informaiton contained herein.  This information relates only to SLT, and does not relate to its use in combination with any other material or in any other process.

Copyright 2016 - ATP, LLC. - All rights reserved
110 ATP Drive, Albertville, AL 35951
800-999-1ATP or 800-999-1287
For Info - email
Designed and Hosted by Hamilton Services, Inc. 865-566-4948 www.hamiltonservices.net